Porcelain laminae, which means leaf coating as a word, is the process of gluing a thin layer of porcelain on the front faces of the teeth after slight etching on the front faces of the teeth.

Since porcelain is prepared as a very thin layer, its light transmission and reflectance is very close to the natural tooth, thus providing excellent aesthetics and no tooth reduction is required. It is also strong against abrasion. As the surface is smooth, it minimizes the coloration caused by cigarettes and similar reasons.

 

Composite Lamina

 

Generally, the front group teeth, external surfaces are made with the composite aesthetic restorations. It is a method of re-contouring with composite fillers without any abrasion on the teeth or by mild etching if necessary. The patient has enough aesthetic appearance. Composite Lamina can be done in a single session for a period of 30 min-1 hour and the immediate result is achieved. It is an aesthetic process that requires attention and attention, and it should be very well adjusted especially with the gum. Otherwise, food residue in that area may accumulate and cause inflammation of the gums.

 

Zirconium

 

Zirconium coating is the most suitable coating type for patients with metal allergy. Zirconium, compared to other metals; it is more and more preferred due to being more resistant to temperature and corrosion. However, zirconium used in tooth making is not used as a pure mineral but after it has been converted into a zirconia ceramic form. The fact that zirconium is a white substance creates a more transparent image in the teeth and is highly preferred because of the white edges of the gums. It is among the most aesthetic substances.

 

Full Porcelain Crowns

 

Porcelain tooth structures with increased aesthetic quality and durability.

 

The ceramic structure is supported by a strong substructure and the whole structure of the porcelain is strengthened.

 

Although many factors affect the image of crowns; the most important thing is their reaction to light. Natural teeth shine through the light, resulting in full porcelain crown teeth with depth and vitality.

 

Porcelain substructure does not have metal because of light transmittance increases. Thus aesthetically, the best results are obtained for natural teeth, so full porcelain is preferred especially in the front teeth.

 

Bonding

 

Bonding applications are among the protective methods used in aesthetic dentistry. Bonding is applied by gluing a material to the tooth without causing damage to the tooth. When the patient has small intervals between the teeth and small deformities, additions are made on the teeth using the bonding material without cutting the teeth. The dentist performs procedures in the mouth of the patient and provides a reshaping of the teeth. Bonding applications may be preferred for minor, minor defects in the teeth. In case of problems, laminates and porcelain crowns should be made.

 

Bleaching (Teeth Whitening)

 

Teeth whitening is a cosmetic solution recommended for people who are not satisfied with the color of their teeth.

 

It is an oxygenation method used to whiten teeth that have changed color for various reasons or to open a few tons of individual tooth color.

 

The natural colors of the teeth darken with external factors over the years. With the teeth whitening process that can be done in the practice or at home, teeth can be opened in 2-10 tons to achieve a satisfactory whitening and a beautiful smile. Bleaching should be performed under the supervision of a dentist.